G1562 致新代理商 功放系列 运算放大器

致新G1562 General Description

The G1562 is a single rail-to-rail input/output operation amplifier  with  the  low  power,  high  voltage  swing.  Op-erating  on  supplies  ranging  from  4.5V  to  20V,  while  current  consuming  only  3mA,  the  G1562  is  with  high  unit-gain  bandwidth  of  30MHz.  The  G1562  also  pro-vides  common  mode  input  ability  beyond  the  supply  rails,  as  well  as  rail-to-rail  output  capability.  This  en-ables this amplifier to offer maximum dynamic range at any supply voltage.

The  G1562  also  features  fast  slewing  and  settling  times,  as  well  as  a  high  output  drive  capability  of  65mA  (sink  and  source).  These  features  make  these  amplifiers ideal for high speed filtering and signal con-ditioning application. Other applications include battery power,  TFT  Vcom  /Gamma  buffers,  portable  devices,  and anywhere low power consumption is important.

There  are  over  temperature  and  short-circuit  current  limit  protection  embedded  to  avoid  the  unexpected  damages.  The  G1562  is  available  in  TSOT-23-5  and  SC-70-5 (SOT-353) package.

Features

• „Wide Supply Operation Range +4.5V to +20V   
• „Beyond the Rails Input Capability   
• „Rail-to-Rail Output Swing
• „Low Supply Current, 3mA (Typical)
• „Low Input Offset Voltage 2mV (Typical)
• „Internal  Frequency  Compensated  for  Unit  Gain  Stable
• „Wide Bandwidth (unit gain) 30MHz „
• High Slew Rate =150V/μs
• „Large DC Voltage Gain 80dB (Typical) „
• ±180mA Output Short Current
• „Embedded Over-Temperature Protection
• „Short-Circuit Current Limit Protection
• „TSOT-23-5 and SC-70-5 (SOT-353) Package Available

Applications „

• Portable Equipment
• „TFT Vcom/Gamma buffers „
• Battery-Powered Equipment „
• ASIC Input or Output Amplifier
• „Low Power/Low Voltage Applications

Ordering Information

Note:  TO:  TSOT-23-5      
TA:  SC-70-5  (SOT-353)                  
1& 2 & 3: Bonding Code
U: Tape & Reel 

Pin Configuration