产品
台湾致新G690 G691
G690/G691 台湾致新代理商 GMT 重置系列 嵌入式延迟时间 G691L293T73Uf
Microprocessor Reset IC
Part Number | Vin (V)min. | Vin (V) max. | Detecting Voltage (V) |
Manual Input |
Delay (ms) | Isupply(uA) | Note | Package |
G690/1 | 1 | 5.5 | 2.93/ 3.08/4.00/ 4.38/4.63 |
N | 150 | 10 | G690H/L Push-Pull High/Low Output G691L Open-Drain Output |
SC-70-3/ SOT-23 |
General Description
The G690/G691 are microprocessor (μP) supervisory circuits used to monitor the power supplies in μP and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with +5V, +3.3V, +3.0V- pow-ered circuits.
These circuits perform a single function: they assert a reset signal whenever the VCC supply voltage declines below a preset threshold, keeping it asserted for at least 140ms after VCC has risen above the reset threshold. Reset thresholds suitable for operation with a variety of supply voltages are available.
The G691L has an open-drain output stage, while the G690 have push-pull outputs. The G691L’s open-drain RESEToutput requires a pull-up resistor that can be connected to a voltage higher than VCC. The G690L have an active-low RESEToutput, while the G690H has an active-high RESET output. The reset com-parator is designed to ignore fast transients on VCC, and the outputs are guaranteed to be in the correct logic state for VCC down to 1V.
Low supply current makes the G690/G691 ideal for use in portable equipment. The G690/G691 are available in 3-pin SOT-23 and SC-70-3(SOT-323) packages.
Features
Precision Monitoring of +3V, +3.3V, and +5V Power-Supply Voltages
Fully Specified Over Temperature
Available in Three Output Configurations
Push-Pull RESET Output (G690L)
Push-Pull RESET Output (G690H)
Open-Drain RESET Output (G691L)
140ms min Power-On Reset Pulse Width
10μA Supply Current
Guaranteed Reset Valid to VCC = +1V
Power Supply Transient Immunity
No External Components
3-Pin SOT-23 and SC-70-3(SOT-323) Packages
Applications
Computers
Controllers
Intelligent Instruments
Critical μP and μC Power Monitoring
Portable / Battery-Powered Equipment
Automotive
Pin Configuration Typical Application Circuit
致新GMT代理商,还有更多精彩文章致新电源管理IC分享《台湾致新G686 G687》《台湾致新G680 G681》