G2030 台湾致新代理商 GMT DC-DC系列马达驱动器

Part Number	Vin (V)min.	Vin (V) max.	VM (V) min.	VM (V) max.	CH	Built-in PI	Exterior Control	Serial Control	Note	Package
G2030	2.5	6	2.9	6	5+1	2	Y	Y	CH1~3 : CV/FS, CH4 : CC/CV/FS, CH5 : CC/FS, Chopper Control	TQFN4X4-32

General Description
G2030 is a 5+1-channel H-Bridge motor drivers IC forthe digital camera and so on. It has four full-swing/constant voltage drivers and two full-swing/constant current drivers. G2030 can be operated in serial control mode or partial exterior control mode. When operating in partial exterior control mode, the mode of each CH is fixed by initialserial control setting. When operating in serial control mode, the mode of each driver can be setting by serial control.

Features
Built-in 4 full-swing/constant voltage drivers switched by serial control with brake function
Built-in 2 constant current drivers for shutter or IRIS
Low on-resistance (1.2Ω, sum of on-resistance of up side and bottom side)
Output current：IOUT<=0.8A(max.) for each channel
Built-in thermal shutdown (TSD, 150°C)
CH1/2 corresponds to STM control of 2-2 phase or 1-2 phase
Built-in exclusive control mode: CH13/23 the combination control mode of 6CH is set
All power supply systems (VCC,VM12,VM3,VM45) can be set up with an independent power supply
Power save mode corresponds by serial control setup
PR Comparator 2 channel built-in.
PI (photo interrupter drive) 2 channel built-in.
Small 32TQFN (4×4mm) is adopted

Applications
Stepping motor driver/ DC motor driver for DSC

Ordering Information