台湾致新G964

首页产品电源管理IC线性稳压器LDOGMT致新科技LDO系列台湾致新G964

G964 台湾致新代理商 GMT LDO系列 双电源LDO
1A Low Dropout Regulator with Enable

Part Number Vin (V)min. Vin (V) max. LOUT(A) VOUT(V) Dropout (V) EN Dis-R (Ω) IQ(uA) Note Package
G964 1.4 5.5 1 ADJ(0.8) 0.15 Y 90 1000 MLCC, POK SOP-8

 

General Description
The  G964  is  a  high  performance  positive  voltage  regulator  designed  for  use  in  applications  requiring  very low Input voltage and very low dropout voltage at up to 1 amps. It operates with a VIN as low as 1.4V and VPP voltage 5V with output voltage programmable as low  as  0.8V.  The  G964  features  ultra  low  dropout,  ideal  for  applications  where  VOUT  is  very  close  to  VIN. Additionally,  the  G964  has  an  enable  pin  to  further  reduce  power  dissipation  while  shutdown.  The  G964  provides  excellent  regulation  over  variations  in  line,  load and temperature. The G964 provides a power OK signal  to  indicate  if  the  voltage  level  of  VO  reaches  92% of its rating value.

The G964 is available in the power SOP-8 package. It is  available  with  1.2V,  1.5V,  1.8V  and  2.5V  internally  preset  outputs  that  are  also  adjustable  using  external  resistors.

Features „
Adjustable Output Low to 0.8V „
Input  Voltage  as  Low  as  1.4V  and  VPP  Voltage  5V „
150mV Dropout @ 1A, VO 1.2V „
Over Current and Over Temperature Protection „
Enable Pin
„Low Reverse Leakage (Output to Input )   
„VO Stable with Ceramic Capacitor „
±2% Output Voltage „
VO Power OK Signal„
1.2V,  1.5V,  1.8V  and  2.5V  Options  by  Setting  ADJ  Pin  Below  0.2V  and  Adjustable  Externally  Using Resistors „
VO Pull Low Resistance when Disable„
SOP-8 Packages

Applications
„Motherboards „
Peripheral Cards
„Network Cards „
Set Top Boxes „
Notebook Computers

Ordering Information

ORDER NUMBER (Pb free/Green) MARKING TEMP. RANGE PACKAGE
G964-12ADJP11U G964-12 40°C~ +85°C SOP-8
G964-15ADJP11U G964-15 40°C~ +85°C SOP-8
G964-18ADJP11U G964-18 40°C~ +85°C SOP-8
G964-25ADJP11U G964-25 40°C~ +85°C SOP-8

Note: P1: SOP-8           
1:  Bonding  Code            
U  :  Tape  &  Reel            
e.g.  18  denotes  the  1.8V  output  voltage

Pin Configuration                                                                                     Typical Application Circuit

G964 台湾致新代理商 GMT LDO系列 双电源LDO

GMT致新代理商,还有更多致新电源管理IC分享《GMT致新科技LDO系列》《线性稳压器LDO

在线咨询关于大鑫浪产品联系我们