G916 台湾致新代理商 GMT LDO系列 单电源LDO
300mA High PSRR, Low Noise, LDO Regulators
| Part Number | Vin (V)min. | Vin (V) max. | LOUT(A) | VOUT(V) | Dropout (V) | EN | Dis-R (Ω) | IQ(uA) | Note | Package |
| G916 | 2.5 | 6 | 0.3 | 1.2/1.8/2.5/3.3/ ADJ(1.25) |
0.24 | Y | Y | 90 | MLCC | SOT-23-5 |
GeneralDescription
The G916 series is a low supply current, high PSRR, low noise, and low dropout linear regulator that comes in a space saving TSOT-23-5, SOT-23-5 & SC-70-5(SOT-353) package. The supply current at no-load is 90μA. In the shutdown mode, the maximum supply current is less than 1μA. Operating voltage range is from 2.5V to 6.0V. The over-current protection limit is set at 550mA typical. An over- temperature protection circuit is built-in in the Device to prevent thermal overload. These power saving features make the G916 series ideal for use in the battery-powered applications such as notebook computers, cellular phones, and PDA’s.
The G916 has two modes of operation. When the SET pin is connected to ground, its output is a pre-set value: 3.3V. There is no external component needed. When an output other than the preset value is needed, two ex-ternal resistors should be used as a voltage divider. The output voltage is then adjusted by the resistor ratio. G916-XXX is with fixed-mode output. The output voltage range is from 1.2V to 5.0V.
Features
Low, 90μA No-Load Supply Current
Guaranteed 300mA Output Current
Dropout Voltage is 200mV @ 150mA Load
PSRR=70dB
Over-Temperature Protection and Short-Circuit Protection
Fixed Mode: 1.20V~5.00V (G916-XXX)
Adjustable Mode: from 1.25V to 5.50V (G916)
Max. Supply Current in Shutdown Mode < 1μA
Low Output Noise at 28μVRMS with bypass Ca-pacitor
Stable with low cost ceramic capacitors
Applications
Notebook Computers
Cellular Phones
PDAs
Digital still Camera and Video Recorders
Hand-Held Devices
Audio Codec
Pin Configuration Typical Application Circuit
GMT致新代理，还有更多致新电源管理IC分享《GMT致新科技LDO系列》《线性稳压器LDO》
