G2022 台湾致新代理商 GMT DC-DC系列马达驱动器

致新G2022

首页产品电源管理ICDC-DC芯片致新科技DC-DC致新G2022

G2022 台湾致新代理商 GMT DC-DC系列马达驱动器
8+1CH Series Input Motor DriverIC for DSC

Part Number	Vin (V)min.	Vin (V) max.	VM (V) min.	VM (V) max.	CH	Built-in PI	Exterior Control	Serial Control	Note	Package
G2022	3	5.5	3	6	8+1	2	Y	I2C	CH1~3 & CH5~9 : CV/FS, CH4 : CC/CV/FS	TQFN5X5-40

General Description
G2022 is a 8i+1-channel H-Bridge motor drivers IC for the digital camera and so on. It has eight full-swing/constant voltage drivers and one full- swing/constant current/constant voltage drivers. G2022 can be operated in serial control mode or partial exterior control mode. When operating in partial exterior control mode, the mode of each CH is fixed by initial serial control setting. When operating in serial control mode, the mode of each driver can be setting by serial control.

The serial interface (I2C) that operates at clock rates up to 400 KHz.

Features
Built in 4 full-swing/constant voltage drivers for simulation micro steeping motor. (STM OIS)
Built in 1 full-swing/constant current drivers for shutter or IRIS
Built in 3+1 full-swing/constant voltage drivers switched by serial control with brake function.
Low on-resistance (1.2Ω, sum of on-resistance of upside and bottom side)
Output   current：IBOUTB<=0.8A(max.)   for   each   channel
Build-in thermal shutdown (TSD, 150°C)
CH1/2 corresponds to STM control of 2-2 phase or 1-2 phase
Built in exclusive control mode: CH25/45 (STM-B), the combination control mode of 10CH is set
All power supply systems (VCC,    VM12,    VM345,VM6789) can be set up with an independent power supply
Power save mode corresponds by serial control setup Built in POR (power on reset) function.
I2C interface
PI (photo interrupter driver) 2 channel built-in
TQFN(5*5mm)-40 package is adopted

Applications
Stepping motor driver/ DC motor driver motor driver for DSC

Ordering Information