G2030 台湾致新代理商 GMT DC-DC系列 马达驱动器
5+1CH serial input motor driverIC for DSC

Part Number	Vin (V)min.	Vin (V) max.	VM (V) min.	VM (V) max.	CH	Built-in PI	Exterior Control	Serial Control	Note	Package
G2030	2.5	6	2.9	6	5+1	2	Y	Y	CH1~3 : CV/FS, CH4 : CC/CV/FS, CH5 : CC/FS, Chopper Control	TQFN4X4-32

 

General Description
G2030 is a 5+1-channel H-Bridge motor drivers IC forthe digital  camera  and  so  on.  It  has  four  full-swing/constant voltage  drivers  and  two  full-swing/constant  current  drivers. G2030  can  be  operated  in  serial  control  mode  or  partial exterior  control  mode.  When  operating  in  partial  exterior control  mode,  the  mode  of  each  CH  is  fixed  by  initialserial  control  setting.  When  operating  in  serial  control mode,  the  mode  of  each  driver  can  be  setting  by  serial control.

Features
Built-in 4 full-swing/constant voltage drivers switched by serial control with brake function
Built-in  2  constant  current  drivers  for  shutter  or IRIS
Low  on-resistance  (1.2Ω,  sum  of  on-resistance  of up side and bottom side)
Output current：IOUT<=0.8A(max.) for each channel
Built-in thermal shutdown (TSD, 150°C)
CH1/2 corresponds to STM control of 2-2 phase or 1-2 phase
Built-in exclusive control mode: CH13/23 the combination control mode of 6CH is set
All   power   supply   systems   (VCC,VM12,VM3,VM45)  can  be  set  up  with  an  independent  power supply
Power save mode corresponds by serial control setup
PR Comparator 2 channel built-in.   
PI (photo interrupter drive) 2 channel built-in.
Small 32TQFN (4×4mm) is adopted

Applications   
Stepping motor driver/ DC motor driver for DSC

Ordering Information

MARKING	TEMP. RANGE	PACKAGE (Green)
2030	~20°C to 85°C	TQFN4X4-32

Note: K1: TQFN4X4-32 1: Bonding Code U: Tape & Reel

Pin Configurations

台湾GMT致新代理商，欢迎咨询13244774414，还有更多精彩致新电源管理IC分享《致新DC-DC》，《DC-DC芯片》。